Home > Chemistry > Chemistry Project to Prepare Rayon Threads From Filter Paper

Chemistry Project to Prepare Rayon Threads From Filter Paper

Download Project
Share Facebook Twitter Orkut SMS

Prepare cuprammonium rayon threads from filter paper

2009-2010

Chemistry Investigatory Project

Ravindra Singh XllScB

Army public School, Jaipur

This is to certify that Ravindra Singh, student of class xu B, Army

Public School has completed the project titled To prepare a sample of cuprammonium rayon threads from filter paper during the academic year 2009-2010 towards partial fulfillment of credit for the chemistry practical evaluation of Aissc$ 2010, and submitted satisfactory report, as compiled in the following pages, under my supervision.

This proj’ect is absolutely genuine and does not indulge in plagiarism of any kind. The references taken in making this proj’ect have been declared at the end of this report.

Mr. Brajesh Pandit

(ead of Department chemistry

Army Public School,jaipur

“There are tinges when silence speaks so much more loudly than words of praise to onlyy as good as belittle a person, whose words do not express, but onlyy put a veneer over true feelings, which are of gratitude at this point of time.”

\ would like to express my sincere gratitude to my chemistry men-tor Mr. Brajesh Pandit, for his vital support, guidance and encouragement -without which this project would not have come forth. ( would also like to express my gratitude to the staff of the Department of chemistry at Army Public School for their support during the making of this project.

Aim

To prepare a sample of cuprammonium rayon threads from filter paper

Apparatus Required

a)   Conical flask (preferably 250 ml)

b)  Funnel

c)    Glass rod

d)  Beaker (preferably 250 ml)

e)    Water bath

f)      Filter paper (Whatman paper or ordinary filter paper sheets. Preferably, Whatman)

Chemicals Required

a)         CuSO4

b)  NaOH solution

c)    Liquor ammonia solution

d)        Dilute H2SO4

e)    Whatman Paper

f)      Distilled H2O

Background

Rayon is a synthetic fiber produced from cellulose. Developed in an attempt to produce silk chemically, it was originally called artificial silk or wood silk. Rayon is a regenerated fiber, because cellulose is converted to a liquid compound and then back to cellulose in the form of fiber. For example, cuprammonium rayon is made by dissolving cellulose in an ammoniacal copper sulphate solution.

The characteristics of rayon fibers are:

s    They are highly absorbent,

s    Soft and comfortable,

s    Easy to dye &

s    Drape well.

Introduction

Cellulose is nature’s own giant molecule. It is the fibrous material that every plant from seaweed to the sequoia makes by baking glucose molecules in long chains; the chains are bound together in the fibers that give plants their shape and strength. Wood has now become the main source of cellulose. Since it contains only 40% to 50% cellulose, the substance must be extracted by ‘pulping’. The logs are flaked, and then simmered in chemicals that dissolve the tarry lignin, resins and minerals. The remaining pulp, about 93% cellulose, is dried and rolled into sheets-raw material for paper, rayon and other products.

It can be obtained in 2 ways:

  1. Viscose Process: Cellulose is soaked in 30% caustic soda solution for about 3 hrs. The alkali solution is removed and the product is treated with CSi. This gives cellulose xanthate, which is dissolved in NaOH solution to give viscous solution. This is filtered and forced through a spinneret into a dilute H2SO4 solution, both of which harden the gum­like thread into rayon fibers. The process of making viscose was discovered by C.F.Cross and EJ.Bevan in 1891.
  2. Cuprammonium Rayon: Cuprammonium rayon is obtained by dissolving pieces of filter paper in a deep blue solution containing tetra-ammine cupric hydroxide. The latter is obtained from a solution of copper sulphate. To it, NH)OH solution is added to precipitate cupric hydroxide, which is then dissolved in excess of NH/.

Reactions:

CUSO4+ 2NH4OH — Cu(OH)2+ (NH4)2S04

Pale blue ppt

Cu(OH) 2 + 4NH4OH — [Cu(NH3) 4](0H) 2 + 4H2O

[Cu(NH3) 4](0H) 2 + pieces of filter paper left for 10-15 days give a viscous solution called VISCOSE.

Procedure

A. Preparation of Schweitzer’s Solution:

a)     Way20gofCuSO).5H20.

b)     Transfer this to a beaker having 100ml distilled water and add 15ml of dilute H2SO4 to prevent hydrolysis of CuSO).

c)      Stir it with a glass rod till a clear solution is obtained. Add 11ml of liquor ammonia drop by drop with slow stirring. The precipitate of cupric hydroxide is separated out.

d)    Filter the solution containing cupric hydroxide through a funnel with filter paper.

e)     Wash the precipitate of cupric hydroxide with water until the filtrate fails to give a positive test for sulphate ions with barium chloride solution.

f)       Transfer the precipitate to a beaker that contains 50ml of liquor ammonia or wash it down the funnel. The precipitate when dissolved in liquor ammonia gives a deep blue solution of tetra-ammine cupric hydroxide. This is known as SCHWEITZER’S SOLUTION.

B. Preparation of Cellulose material

a)     After weighing 2g of filter paper divide it into very fine pieces and then transfer these pieces to the tetra-ammine cupric hydroxide solution in the beaker.

b)     Seal the flask and keep for 10 to 15 days, during this period the filter paper is dissolved completely.

C. Formation of Ravon Thread

a)      Take 50ml of distilled water in a glass container. To this add 20ml of conc H2SO4 drop by drop. Cool the solution under tap water. In a big glass container pour some of the solution.

b)     Fill the syringe with cellulose solution prepared before.

c)      Place the big glass container containing H2SO4 solution produced before in ice (the reaction being spontaneous results in excess release of energy in the form of heat which makes the fibers weak and breaks them).

d)     Immerse the tip of the syringe in the solution and press gently. Notice the fibers getting formed in the acid bath. Continue to move your hand and keep pressing the syringe to extrude more fibers into the bath.

e)      Leave the fibers in solution till they decolorize and become strong enough.

f)       Filter and wash with distilled water.

Precautions

a)     Addition of excess NH/ should be avoided.

b)     Before taking the viscose in the syringe make sure that it does not contain any particles of paper, otherwise, it would clog the needle of the syringe.

c)      Addition of NH/ should be done in a fume cupboard and with extreme care. The fumes if inhaled may cause giddiness.

d)    Use a thick needle otherwise the fibers won’t come out.

Bibliography

Chemistry (Part I) -  Textbook for Class XII; National Council of

Educational Research and Training Together With Lab Manual Chemistry XII; Bharti Bhawan (Publishers &

Distributors) Comprehensive Chemistry Lab Manual XII ” Chemistry Projects

“Wikipedia The free encyclopedia” “Rayon Fiber”

  1. bond
    September 17th, 2010 at 12:37 | #1

    viscose was added to hot sulphuric acid now it breaks,how to make it strong???

  1. No trackbacks yet.